View 2STF1340_4188958.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2STF1340
Low voltage fast-switching NPN power bipolar transistor
Preliminary Data
General features

Very low collector-emitter saturation voltage High current gain characteristic Fast switching speed Miniature SOT-89 plastic package for surface mounting circuits In compliance with the 2002/93/EC European Directive
SOT-89
Description
The device in a NPN transistor manufactured using new "PB-HCD" (Power Bipolar High Current Density) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. The complementary PNP is the 2STF2340.
Internal schematic diagram
Applications

LED Motherboard & hard disk drive Mobile equipment Battery charger Voltage regulation
Order codes
Part Number 2STF1340 Marking 1340 Package SOT-89 Packing Tape & reel
October 2006
Rev 1
1/8
www.st.com 8
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
2STF1340
Contents
1 2 3 4 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2/8
2STF1340
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VCES VCEO VEBO IC ICM Ptot Tstg TJ
Absolute maximum rating
Parameter Collector-emitter voltage (V CE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Total dissipation at T amb = 25C Storage temperature Max. operating junction temperature Value 40 40 5 3 6 1.4 -65 to 150 150 Unit V V V A A W C C
Table 2.
Symbol
Thermal data
Parameter __max Value 89.3 Unit C/W
Rthj-amb(1) Thermal resistance junction-amb (1) Device mounted on PCB area of 1cm2
3/8
Electrical characteristics
2STF1340
2
Electrical characteristics
(Tcase = 25C unless otherwise specified) Table 3.
Symbol ICBO IEBO
Electrical characteristics
Parameter Collector cut-off current (IE =0) Emitter cut-off current (IC =0) Collector-emitter breakdown voltage (IE = 0) Test Conditions VCB = 40V VEB = 5V Min. Typ. Max. 0.1 0.1 Unit A A
V(BR)CBO
IC = 100A
40
V
Collector-emitter V(BR)CEO (2) breakdown voltage (IB = 0) V(BR)EBO VCE(sat) (2) Emitter-base breakdown voltage (IC = 0) Collector-emitter saturation voltage Base-emitter saturation voltage
IC = 10mA
40
V
IE = 100A IC = 2A IC = 3A IC = 2A IC = 0.1A IB = 100mA IB = 150mA IB = 100mA VCE = 2V VCE = 2V VCE = 2V VCE = 5V V CB = 10V
5 0.2 0.3 0.9 280 250 200 100 tbd 1.25
V V V V
VBE(sat) (2)
hFE (2)
DC current gain
IC = 1A IC = 3A IC = 0.1A f = 100MHz IE = 0 f = 1MHz IC = 1.5A
fT CCBO
Transition frequency Collector-base capacitance Resistive load Turn-on time Turn-off time
MHz pF
ton toff
VCC = 10V
IB1 = -IB2 = 150mA
tbd tbd
ns ns
Note (2) Pulsed duration = 300 s, duty cycle 1.5%
4/8
2STF1340
Package mechanical data
3
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
5/8
Package mechanical data
2STF1340
SOT-89 MECHANICAL DATA
mm MIN. A B B1 C C1 D D1 E e e1 H L 1.4 0.44 0.36 0.35 0.35 4.4 1.62 2.29 1.42 2.92 3.94 0.89 TYP. MAX. 1.6 0.56 0.48 0.44 0.44 4.6 1.83 2.6 1.57 3.07 4.25 1.2 MIN. 55.1 17.3 14.2 13.8 13.8 173.2 63.8 90.2 55.9 115.0 155.1 35.0 mils TYP. MAX. 63.0 22.0 18.9 17.3 17.3 181.1 72.0 102.4 61.8 120.9 167.3 47.2
DIM.
P025H
6/8
2STF1340
Revision history
4
Revision history
Table 4.
Date 20-Oct-2006
Revision history
Revision 1 Initial release. Changes
7/8
2STF1340
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
8/8

▲Up To Search▲

Price & Availability of 2STF1340

	To Download 2STF1340 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .